Based on 264+ reviews
ACREDITED
A+ Rating
Pool decks get wet constantly. Between splash-out, sunscreen, dirty feet, and Florida weather, bare concrete turns rough, stained, and slick fast. A pool deck coating seals the surface, improves traction, and makes the whole pool area easier to clean and live with.
Pool deck resurfacing and pool deck refinishing are both about taking worn concrete and giving it a finish that can live outside. Our system uses a polyurea basecoat with a UV-stable polyaspartic topcoat, built for outdoor pool decks that stay wet and sit in the sun most of the year.
If you’re comparing pool deck resurfacing options, here’s what a coating system changes on a concrete pool deck.
Pool decks are wet more often than they’re dry. That’s when smooth concrete gets slick, especially near steps and entry points. Our non slip pool deck coating is built around texture. A full broadcast finish gives wet feet reliable grip, and we can increase traction in the splash zones that see the most traffic.
Quartz is a solid option when traction is the main concern or you want a different look than flake. It’s the same system, just a quartz broadcast instead of flake. The texture is tighter and more uniform, and it gives the deck a more grippy feel.
Old pool-deck concrete gets gritty. It holds dirt, the top layer starts wearing uneven, and that’s what scrapes feet and tracks dust back inside. A pool deck coating gives you a sealed surface that feels more consistent underfoot, with texture for traction that doesn’t need to feel like sandpaper.
If you’re comparing options like rubberized decking or a cool deck coating, those can be softer or cooler in certain setups. A coating isn’t “soft,” but it’s smoother than beat-up concrete, it doesn’t have grout lines or joints, and it’s easy to rinse clean after a long pool day.
Pool decks deal with nastier mess than a normal patio. Sunscreen and body oils, leaf stains, mildew/algae in the pores, and rust marks from furniture all show up fast on bare concrete. With pool deck resurfacing done as a sealed coating system, the mess stays on the surface instead of soaking in—so rinsing and normal cleaning actually works again.
Outdoor pool decks don’t get days off. They stay wet, they bake in the sun, and they take steady traffic all season. Our pool deck coating is built for long-term outdoor use, not a paint-style layer that’s just sitting on top.
The polyurea basecoat chemically bonds to the concrete, and the UV-stable polyaspartic topcoat helps the finish keep its color and clean look outdoors. Just as important, it holds up well to everyday abrasion from bare feet, pool chairs, and normal traffic around the deck.
A coated pool deck changes the whole space. It makes the pool surround look clean, intentional, and put-together, even before you add furniture or landscaping. The finish is consistent across the deck, with texture that looks like it belongs around water.
Choose from a variety of deck coating options like flake and quartz finishes many colors, so you can match the look to your pool tile, coping, and home exterior. Whether you want subtle and modern or something with more contrast, the deck becomes part of the design.
Pool decks are a different kind of surface. They’re often exposed to moisture, sit in full sun, and the prep has to be right if you want a coating to last. Homeowners across Orlando and east-central Florida trust XANO521 Concrete Coatings because our system is built for outdoor pool decks and installed by certified pros who follow a consistent prep process.
We’re a veteran-owned local business. We show up, handle the repairs and grinding the right way, and leave you with a pool deck that looks clean, feels safer underfoot, and stays easier to maintain.
Spills? No sweat! Wipe away messes in seconds with our super slick coating.
Sun-proof and fade-resistant, our coating keeps its cool and color, no matter the weather.
It’s 98% more flexible than epoxy. Bend it, twist it — our coating bounces back!
Our pool deck surface coatings combine industrial-grade surface prep with a polyurea basecoat that bonds deep into the concrete, followed by full-coverage decorative flake and a UV-stable polyaspartic topcoat. If you’re looking at concrete pool deck resurfacing or pool concrete resurfacing, the goal is the same. You want a sealed, durable surface made for wet outdoor spaces.
Just as important as materials is prep. We handle concrete pool deck repair first, then grind and profile the surface so the coating bonds correctly.
We diamond grind the surface and repair cracks, chips, and spalling to create a clean profile for long-lasting adhesion.
A fast-curing base layer that chemically bonds to the concrete, providing strength and flexibility outdoors.
Decorative flake is fully broadcast into the coating to add texture, style, and traction.
A UV-stable finish that resists fading and staining while keeping the surface easy to clean.
We inspect the pool deck, review layout and water exposure, and provide a clear, no-pressure quote.
Cracks, spalling, and surface imperfections are repaired, then the concrete is diamond-ground for proper adhesion.
A polyurea basecoat is applied to form a permanent bond to the concrete.
Decorative flakes are broadcast, then scraped and vacuumed for a smooth, even finish.
A UV-stable topcoat seals the surface for long-term durability in wet outdoor conditions.
Final inspection ensures clean edges, consistent texture, and a finished deck ready for use.
XANO521 Concrete Coatings serves homeowners across Orlando and Florida’s east-central region. We regularly resurface pool deck and install outdoor coatings throughout the following areas:
Located Nearby? We’re happy to help. Request an estimate and we’ll confirm service availability for your area.
A pool deck upgrade is a big change in how the whole space looks and feels. Financing can make it easier to move forward now, instead of putting it off for another season.
We offer flexible financing options so you can spread the cost over time while getting a safer, cleaner, easier-to-maintain pool deck.
For concrete pool decks, the best system is one that delivers wet traction, holds up in full sun, and bonds correctly to the slab. That’s why we use a polyurea basecoat with a UV-stable polyaspartic topcoat, finished with flake or quartz for texture and style. As a professional pool deck coating company, we install this system because it’s the best long-term option we’ve found for Florida pool decks when it’s prepped and applied the right way.
Any smooth surface can get slick when it’s wet. A pool deck coating doesn’t have to. Traction comes from the finish we build into the system.
With a full broadcast flake or quartz finish, the surface has texture under the topcoat, which helps wet feet grip. If you want even more traction, we can add a traction additive in the topcoat, especially in high-risk areas like steps, entry points, and the main walk paths.
It’s all about the balance you want. We can dial traction up in the high-risk wet zones while keeping the overall feel comfortable under bare feet.
Yes. We can tune traction where it matters most. Steps, pool entries, and the route back to the house are usually the highest-risk zones.
Compared to worn concrete, a coated pool deck feels more consistent and less gritty. Old concrete often gets rough as the surface wears and holds dirt in the pores.
A broadcast flake finish has a light, bumpy texture that helps with traction without feeling harsh. Quartz has a tighter, more uniform texture and typically feels grippier under wet feet. Both are great options. If you’re not sure which one fits your pool deck, we can bring samples to your free estimate so you can see the look and feel before you decide.
A pool deck finish needs UV stability. That is one reason we use a polyaspartic topcoat designed for outdoor exposure.
No coating stays exactly the same forever, but a UV-stable topcoat holds its look far better outdoors than paint-style products. Penntek also offers a limited lifetime residential warranty that includes UV-related coverage.
Normal pool splash-out and day-to-day exposure are fine. The deck is sealed, so water and typical pool chemistry do not soak into porous concrete the same way.
Like any finished surface, avoid letting harsh chemicals sit for long periods. If something strong is spilled, rinse it off. If you have a saltwater pool, regular rinsing helps reduce residue buildup.
Most of the common pool-deck mess is easier to deal with on a sealed surface because it stays on top instead of soaking in. Sunscreen and oils, leaf tannins, mildew, and everyday grime clean up more predictably.
Rust stains from metal furniture can still happen, especially if water sits under the legs. Pads under furniture and occasional rinsing go a long way.
No, normal patio furniture use usually won’t damage it. The coating is very durable and holds up well to everyday abrasion.
Most marks come from dragging chairs and tables or from grit caught under the legs. Add felt or rubber pads and lift heavier pieces when you move them. Do that, and the finish will stay looking clean for a long time.
Routine cleaning is simple. Rinse it, sweep it, or use a mild soap and a soft brush when needed.
Pressure washing is usually fine with reasonable settings and technique. Use a wider tip, keep the wand moving, and do not concentrate pressure on one spot. Avoid harsh acids or aggressive degreasers unless you know they are compatible with the finish.
Often, yes. The key is diagnosing what you are looking at and fixing the problem areas before coating. Small cracks, chips, and spalling can typically be repaired during prep.
If there is major movement, severe settling, or moisture issues coming up through the slab, that is a different problem. We inspect the deck and recommend the right path based on your specific conditions.
Most projects run about 1 to 3 days depending on size, repairs, and weather.
Typical use timing is about 24 hours for foot traffic and about 48 hours before setting heavy furniture back down. We will give you a clear schedule and post-install care instructions for your specific project.
Weather can affect schedule. We plan around the forecast and will not apply coatings to a surface that is wet or in unsafe conditions.
If weather shifts mid-project, we pause and protect the work area. The goal is adhesion and finish quality.
Not directly. Paint, sealer, or old coatings are only as strong as their bond to the concrete. Coating over them usually means you are trusting a weak layer to hold everything up.
The right approach is to remove or grind those layers until we get clean, sound concrete. Then the coating system can bond correctly.
Sometimes, but it depends on what is down now and how well it is bonded. If an existing coating is failing, recoating over it will not fix the underlying problem.
We inspect the surface and determine whether it needs removal, profiling, or a full reset. The goal is long-term adhesion.
Small scuffs and cosmetic wear are usually straightforward. Deeper damage depends on cause and extent.
If a section is chipped or compromised, the repair approach is to prep that area correctly and blend the finish so it matches. We inspect and recommend the best repair method based on what happened.
We offer broadcast finishes designed for traction and outdoor durability. The two common looks are flake and quartz.
Flake has a larger pattern and a classic decorative finish. Quartz is tighter and more uniform, with a naturally grippy feel and a different look. We can also adjust traction in key zones based on how the deck is used.
Cost depends on the size of the deck, current condition, how much repair work is needed, and the finish system you choose. Steps, drains, odd shapes, and detailed edges can also affect labor.
The best way to price it is an on-site look. We measure, check the concrete condition, and give you a clear quote based on the real scope.
Yes. We work throughout the Orlando area and nearby east-central Florida communities. The map and city list on this page show the areas we regularly serve. If you’re in the region, we’ll confirm coverage and scheduling during the estimate.
You can DIY your own pool deck, but if your goal is a finish that actually lasts on a wet, sunny pool deck – professional prep + a real system wins almost every time. DIY kits are usually fine for “looks decent for now.” Our installs are built for long-term outdoor use and backed by a limited lifetime warranty.
Fill out form below to schedule estimate for your concrete coatings job.
By submitting this form, you agree to XANO521 Concrete Coatings’s Privacy Policy. You consent to receive phone calls and SMS messages from XANO521 Concrete Coatings to provide updates on your order and inquiries. Message frequency depends on your activity. You may opt-out by texting “STOP”. Message and data rates may apply.
Or you can inquire by phone:
rida
