Based on 264+ reviews
ACREDITED
A+ Rating
Patio concrete in Florida takes constant sun, rain, pollen, and daily foot traffic. Over time it stains, holds heat, and starts to look permanently “kinda dirty.” A concrete patio coating seals the surface, adds traction, and gives the space a clean, finished look that’s easier to live with.
There are plenty of concrete patio coating options. The best concrete coating for patio slabs is one made for outdoor concrete coatings, not a paint-style product.
Many homeowners use the term “patio epoxy” for the look they want. Our system uses a polyurea basecoat with a UV-stable polyaspartic topcoat for better adhesion and flexibility outdoors, which helps it hold up longer in Florida heat and humidity.
A coated patio changes how the space feels day to day. Instead of rough concrete that stays dusty and stains easily, you get a sealed surface that’s easier to clean, more slip-resistant when wet, and looks finished next to the house.
Bare patio concrete has a way of making the whole outdoor space feel unfinished. A patio floor coating gives it a consistent, intentional look that ties the area together instead of leaving you with stained, patchy, mismatched concrete.
If you’ve looked at tile or pavers for the same reason, it’s usually that clean, finished look. A coating gets you there without grout lines to scrub or joints to keep up with.
Outdoor concrete soaks up whatever lands on it. Pollen, dirt, grease, and leaf stains can sink in and stick around, even after a pressure wash. A sealed patio coating keeps mess on the surface so it wipes up instead of setting into the slab.
You’ll notice it after a cookout, muddy shoes, the dog running in and out, or one of those quick Florida pop-up storms that turns dust into mud. Compared to stained concrete or many sealer-only approaches, a full coating system reduces how much gets trapped in the pores of the slab.
Patios get slick when they’re wet. Rain, sprinklers, and pool water do it. That’s when smooth concrete gets sketchy. With a broadcast flake system, the surface has a comfortable texture that improves traction without feeling overly gritty.
Tile and stamped concrete can look great, but the surface can get slick if the finish is too smooth. With a flake system, we can keep it comfortable underfoot and add extra grip where it makes sense.
Outdoor patios get baked and soaked. That’s where cheap coatings start to look rough fast, especially around edges and doorways.
Our system uses a UV-stable topcoat and a basecoat that grabs the concrete, so the finish stays clear and stays bonded. If you’re shopping “patio epoxy,” UV stability and bond strength are what matter outside.
Raw concrete can feel rough, dusty, and abrasive, especially in high-traffic areas and near doors. A coated patio is smoother and easier to move through, with texture that can be kept barefoot-friendly while still improving traction.
Any surface in direct sun will heat up, and color choice and exposure matter. The goal of a patio coating is a cleaner, more comfortable surface that’s easier to maintain. During the estimate, we’ll walk through finish options so it fits how you actually use the space.
Florida patios face constant exposure to sun, moisture, and temperature swings. Bare concrete absorbs heat, shows wear quickly, and becomes harder to keep clean over time. Homeowners choose XANO521 because our system is engineered specifically for these conditions and installed by a certified team that takes surface preparation seriously.
We’re a veteran-owned local business serving Central Florida, known for showing up, doing the prep right, and delivering outdoor surfaces that last. Our coatings are American-made and designed to handle Florida’s climate without fading, peeling, or breaking down prematurely.
Spills? No sweat! Wipe away messes in seconds with our super slick coating.
Sun-proof and fade-resistant, our coating keeps its cool and color, no matter the weather.
It’s 98% more flexible than epoxy. Bend it, twist it — our coating bounces back!
Our patio coating system combines industrial-grade surface preparation with a polyurea basecoat that bonds deep into the concrete, followed by full-coverage decorative flake and a UV-stable polyaspartic topcoat. The result is a finished outdoor surface that resists sun fade, moisture intrusion, and everyday wear.
It’s a concrete covering for patios, not a paint-on layer.
Just as important as the materials is the process behind them. Every step is handled by trained installers focused on proper prep, precise application, and clean, consistent results. Timeline depends on patio size, repairs, and surface condition. After we inspect the concrete, we’ll give you a clear schedule up front.
We diamond grind and repair the concrete to create a clean, profiled surface that ensures long-lasting adhesion outdoors.
A fast-curing base layer that chemically bonds to the concrete, providing strength and flexibility epoxy systems can’t match in outdoor environments.
Decorative flake is fully broadcast into the coating to add texture, color, and slip resistance.
A UV-stable finish that resists fading, moisture, and staining while keeping the surface easy to clean.
We review your space, inspect the concrete, and provide a clear, no-pressure quote.
We repair cracks and imperfections, then diamond-grind the concrete for strong adhesion.
We apply basecoat engineered to form a permanent chemical bond with the concrete.
Flakes are broadcast onto the wet basecoat, then scraped and vacuumed for a smooth, consistent finish.
A UV-stable topcoat seals the surface for long-term durability and easy maintenance.
We review every detail to ensure clean lines, even texture, and a flawless finish.
XANO521 Concrete Coatings serves homeowners across Orlando and Florida’s east-central region. We regularly install patio floor coatings throughout the following areas:
Located Nearby? We’re happy to help. Request an estimate and we’ll confirm service availability for your area.
Upgrading your patio doesn’t have to mean a large upfront expense. We offer flexible financing options that let you spread the cost over time while enjoying your new outdoor space right away.
Whether your patio is part of a pool area, outdoor kitchen, or covered lanai, financing makes it easier to invest in comfort, safety, and long-term durability without delaying the project.
It can be if the surface is too smooth. For patios, we use a full flake broadcast and can add extra traction where it makes sense, so you get grip without turning the floor into sandpaper.
Yes. Pool entry points, steps, and door thresholds are common spots. We can adjust texture in those areas so they feel safer underfoot.
Yes. For patios, the key is using a UV-stable topcoat. That’s why we finish with a polyaspartic topcoat designed for outdoor exposure. It helps prevent the early yellowing and chalky fade you see with coatings that aren’t built for the sun.
Yes, patio coatings work well around pools. Like any outdoor surface, it’s best to rinse off heavy chemical splash-out and clean up spills in a reasonable time. The coating helps resist staining and keeps the patio easier to maintain.
Some people lump this under pool concrete deck resurfacing or pool patio deck resurfacing. Either way, the goal is a sealed surface that’s easier to maintain around water.
It’s designed to resist staining better than raw concrete because the surface is sealed. Grease, drinks, and leaf stains are much easier to clean when they can’t soak into the slab. The simple rule is still the same, clean messes sooner rather than later.
Not from normal use. The coating is tough enough for everyday patio chairs and tables. Most marks happen when furniture gets dragged, or when grit is caught under a leg. Add felt or rubber pads and lift heavy pieces when you move them.
Yes. The flake texture is a little bumpy and helps with traction, but it doesn’t have to feel harsh. We aim for a finish that’s comfortable for bare feet while still improving grip when the patio is wet.
Outdoor concrete floor paint and exterior epoxy paint for concrete can look good at first. Outdoors, they usually wear down faster because they sit on the surface instead of bonding like a true coating system.
If you want a long-term finish, a properly prepped coating system holds up better and is easier to maintain.
People use a lot of names for the same idea. You’ll see searches like outdoor epoxy floor, outdoor epoxy flooring, or outdoor epoxy for concrete. You’ll also see epoxy floor for patio, epoxy floor for outdoor patio, or epoxy flooring for outdoor patio.
Outdoors, what matters is UV stability and bond strength. That’s why we use a polyurea basecoat with a UV-stable polyaspartic topcoat.
Not over paint, sealer, or a failing old coating. We need clean, profiled concrete for the system to bond properly, so those layers have to be removed during prep.
A concrete stain is different—if it’s just a stain (not a sealer), we can prep the slab and coat it like normal. If you’re not sure what’s on your patio, we’ll confirm it during the estimate.
That’s common. We repair cracks and surface damage as part of prep before coating. If there’s active structural movement, the crack can return over time, but we can still improve the surface and overall look.
A lot of homeowners call this concrete patio resurfacing near me or epoxy patio resurfacing. Either way, it starts with repairs and proper prep.
Prep is the make-or-break step. We diamond grind the concrete, handle needed repairs, and clean the surface so the basecoat can bond properly. That’s how you avoid peeling and early failures.
Most patio projects take 1–3 days, depending on size, layout, and repair needs. Weather can affect the schedule—if we’re dealing with rain or high moisture, we may pause and finish once conditions are right.
After installation, you can typically walk on it in about 24 hours. For heavier items like furniture, grills, and planters, plan on about 48 hours.
We plan installs around the forecast and surface conditions. If weather changes, we’ll pause or protect the work as needed. The goal is a clean install, not rushing a topcoat when conditions aren’t right.
Yes. The patio needs to be clear so we can prep and coat properly. If you have heavy items or built-ins, we’ll talk through what needs to move during the estimate.
Patios vary more than garages, so we quote after a quick inspection. That’s why epoxy outdoor patio cost ranges online are all over the place. The main factors are:
Yes. Covered patios and screened lanais are great candidates. They still benefit from a sealed, easy-to-clean surface, and they typically see less direct UV exposure.
We also do concrete porch coatings using the same prep and system.
We can, depending on the layout. Steps and connected walkways are common add-ons, and we can also discuss edges and stem walls during the estimate so everything looks consistent.
Routine cleaning is simple, broom, leaf blower, or a quick rinse. For deeper cleaning, mild soap and water is usually enough. Pressure washing is fine with a fan tip and reasonable pressure. Avoid harsh acids and aggressive grinding-style cleaning that can wear a finished surface over time.
Fill out form below to schedule estimate for your concrete coatings job.
By submitting this form, you agree to XANO521 Concrete Coatings’s Privacy Policy. You consent to receive phone calls and SMS messages from XANO521 Concrete Coatings to provide updates on your order and inquiries. Message frequency depends on your activity. You may opt-out by texting “STOP”. Message and data rates may apply.
Or you can inquire by phone:
rida
